View non-flash version
STRONGER REPAIRS FASTER, EASIER Unique epoxy resin system bonds to almost anything—produces proven, long lasting repairs with outstanding impact strength, tensile strength, and abrasion resistance. • Repairs everything from pinholes and ruptures to complete breaks in pipes, pumps, ducts, tanks, valves, flanges, joints, and machinery casings, including equipment carrying water, low-pressure steam, gases, gasoline, oil, alcohol, and caustics • Bonds tenaciously to most surfaces including steel, plastic, fiberglass composites, ceramic and wood • HIGH STRENGTH ^XYREPAR SYSTEM Vtv © STANDARD RESIN for small holes/cracks (large holes/cracks with reinforcement) RED PUTTY for medium to large holes, cracks and other defects STEEL PUTTY for steel-like repairs on metal— can be drilled, tapped, machined SEALER for small holes and cracks LEVELING COMPOUND for corroded surfaces UNDERWATER PUTTY for repairs in dry, moist, or submerged conditions For detailed literature contact: Ferro Corporation Liquid Coatings and Dispersions Division 1301 N. Flora St., Plymouth, IN 46563 Tel: 219-935-5131 • Fax:219-935-5278 ISO9002 ® FERRO. Circle 212 on Reader Service Card or visit www.maritimereporterinfo.com Concerned About Safety? FILL THE CAPS IN YOUR RADAR. CCNEW7 Thermal Infrared Technology!" See In Complete Darkness Avoid Nightime Collisions Watch for Floating Debris & Markers Designed for Salt Water Use No Illuminators Required Easy Installation on Most Boats Pan/Tilt Thermal Cameras Joy-Stick Operation INTERNATIONAL! inc * www.arion-international.com (800) 365-7443 (407) 568-9767 Fax: (407) 568-9872 Circle 204 on Reader Service Card or visit www.maritimereporterinfo.com Condensation Problems? No Sweat! Deltal Coating! www.deftacoat.com Approved By. U.S. Coast Guard A.B.S. D.N.V. UL Listed Lloyd's Registered MANUFACTURERS REPRESENTATIVES WANTED Delta T Marine Insulating Coatings provides the combination of both excellent thermal & anti-condensation protection in an easy-to-spray, cost effective method of application. Most shipyards see a 30%-50% reduction in total applied costs, if installed by yard personnel. Airborne structural noise is reduced by at least 50%! NON-HAZARDOUS NON-COMBUSTIBLE COST-EFFECTIVE LIGHTWEIGHT A 20-60 mil layer achieves an equivalency of RvE of 9-14. Mascoat Products Phone: (713) 465-0304 Fax: (713) 465-0302 Sales@deltacoat.com Circle 226 on Reader Service Card or visit www.maritimereporterinfo.com Industria Naval de California Full Service Shipyard 2500 Tons lift Capacity Barges, Tug Boats & Fishing Vessels Ensenada, BC Mexico Tel: 01152 646 178 8022 Fax: 01152 646 175 7472 y/y/y/.TQ flu nvni s ot_q tary could prohibit U.S. port calls by ships arriving from for- eign ports without effective antiterrorism measures. Automatic Identification Systems (AIS) The Coast Guard is authorized to require installation and operation of automatic identification systems (AIS) on self- propelled commercial vessels measuring 65 ft. (19.8 m) and longer, vessels carrying more than a specified number of pas- sengers for hire, towing vessels of more than 26 ft. (7.9 m) and 600 hp, and any other vessel determined appropriate. Implementation dates are as follows: • On and after January 1, 2003, for any vessel built after that date; • On and after July 1, 2003, for any vessel built before 2003 that is a SOLAS passenger vessel, a tanker, or a towing vessel engaged in moving a tank vessel; and • On and after December 31, 2004 for all other vessels. The IMO requirement regarding AIS has not been finalized, but may well provide that the equipment is to be installed not later than the first ship's safety equipment survey after July 1, 2004 or December 31, 2004 — whichever occurs first. It is highly unlikely that the U.S. and international implementation dates for AIS will coincide. Container Performance Standards The Secretary, in consultation with the Transportation Secu- rity Oversight Board, is directed to establish a program to evaluate and certify secure systems of international inter- modal transportation. The program would include establishing standards and pro- cedures for screening and evaluating cargo prior to loading in a foreign port for shipment to the United States either direct- ly or via a foreign port; establish standards and procedures for securing cargo and monitoring security while in transit; develop performance standards to enhance the physical secu- rity of shipping containers, including locks and seals; estab- lish standards and procedures for allowing the U.S. Govern- ment to ensure and validate compliance with the program; and any other measures the Secretary considers necessary. The Secretary has also been tasked to develop an antiterror- ism cargo identification, tracking, and screening system for containerized cargo shipped to and from the United States. See the discussion above regarding the cost of upgrading shipping containers, in the 'Grants' section. The industry may well see itself pushed toward having two types of containers — those accepted in the United States and those accepted in the rest of the world. Initially at least, one should expect a shortage of U.S.-certified containers, particularly in smaller ports. Civil Penalties Civil penalties of up to $25,000 could be imposed for viola- tion of the maritime security statutes or regulations. Expedited Rulemaking The Secretary would be authorized to promulgate interim final regulations implementing the maritime security statutes without having to comply with the usual provisions of the Administrative Procedures Act, such as advance notice and comment. Final regulations, though, would have to meet the usual requirements. What this means is that implementation will be greatly expedited, with minimal input from the regulated community. The result will be that any initial mistakes will not be caught 16 Circle 219 on Reader Service Card or visit www.maritimereporterinfo.com Maritime Reporter & Engineering News
