View non-flash version
Special Advertising Section for Urethane Products Corp. UPC's THR Polyurea Spray Coatings Find New Marine Applications THR Polyurea spray coatings are becoming an impor- tant resource and solution to many industrial and non- industrial applications. Environmental concerns and increased legislation pushing to reduce volatile organic compounds (VOC) is a major reason the use of polyurea spray coatings are being considered over traditional coat- ings. THR Polyurea spray coatings are 100% solid and contain no VOC. THR Polyurea spray coatings have a fast, predictable and consistent reaction that requires no catalyst. Because of the fast set capabilities of polyurea spray coatings facil- ity down time can be reduced and put back into service relatively quickly. In addition to minimizing down time the advantages include relative insensitivity to moisture humidity and temperature during application and no limitation on build up thickness. High physical proper- ties with typical values are as follows: Tensile (2000- 3000 psi), Tear strength (300- 400 lbs/inch) Elongation (250-600%). Fast and slow cure THR polyurea spray products are available with tack free times ranging from 6 seconds to 8 minutes. Urethane Products Corporation Incorporated in 1976 formulates, manufactures and sells a full line of THR polyurea spray coatings that have been designed for use in demanding environments. THR polyurea spray coat- ings were originally developed coatings for Urethane Products marine division, which produces marine prod- ucts that include their Marine Guard™, Marine Cush- ion™ foam filled fenders and composite marine buoys. Standard off the shelf systems widely used in the indus- try could not meet the rigorous requirements that were demanded by these products requiring Urethane Prod- uct to develop a polyurea spray coating that could meet these requirements. The requirements included a coating that could withstand and maintain high physical prop- erties over long periods in a salt-water marine environ- ment. Additionally the coating had to provide excellent hydrolytic stability, high impacts and abrasion protec- tion along with exceptional elongation and flex capabil- ity. In 1997 Urethane Products Corporation took their technology and success with their THR polyurea spray coatings for their marine fendering products and devel- oped a full line of coatings to meet the needs of various application requirements and environmental conditions. Available THR Polyurea Spray Systems •Hybrid systems Provide a great option in applications where high physi- cal properties are not required and price is a considera- tion. These systems are a blend of polyurea and polyurethane. Hybrid systems provide good physical properties and provide opportunity in cost sensitive applications. •Aromatic polyurea systems They can be based mainly upon MDI and TDI being the isocyanate hard block segment and polyether amine being the soft with primary or secondary amines as the chain extenders. •Aliphatic polyurea systems (UV color stable) They are based upon IPDI or TMXDI mainly as the isocyanate hard block segment and polyether amine being the soft block. For chain extenders secondary amines has been used. Technical Capability THR polyurea spray coatings have been extensively tested to verify their performance. Tests are performed by independent certified laboratories to ensure reliable accurate and verifiable information. Material testing, verification and inspection are in accordance with the standards and practices of: ASTM, NATA, SSPC and FDA. Additionally Urethane Products maintains a state of the art laboratory used to develop, test and formulate products to meet their customers needs. Application Method THR polyurea spray coatings must be applied to the substrate using a plural component heated spray pump with a minimum of 2000 psi at the spray tip. The mate- rial needs to be pre-heated and maintained at 150°- 165°F. Recommended application temperature range is between 40°-110°F. Field Applications I HR spray polyurea coatings are used in projects ranging from coating steel dock pilings, chemical con- tainment areas, micro digester tanks and other industri- al and non-industrial applications. Recent Projects THR 6001M 100% Polyurea Coating was the coating of choice because traditional microbial resistant coatings were not cost effective due to material cost and applica- tion difficulty. Other Urethane Elastomer Coatings would be unable to survive long term in this environment due to the exposure of the oxygen molecule in their Polyurea Ure- thane coatings. The microorganisms in these tanks quickly deteriorate the oxygen molecule and destroy tra- ditional Polyurea Urethane coatings. THR 6001M is a proprietary formula and process that eliminates the oxy- gen molecule in the 100% polyurea system and provides a long-term solution for this application. Challenges The use of polyurea is still in the growth stage. Although there are many success stories, polyurea is moving into new areas and replacing traditional materi- al such as epoxy, polyurethane, acrylics, paint and many others. Advances in technology in both the chemistry and equipment have created new opportunities for polyurea that were previously not considered. Circle 255 on Reader Service Card www.marinenewsinfo.com THR 9200M Polyurea Spray Coating THR 9200M Polyurea coating was chosen by Washington State Ferries fisheries department in a test project to encapsulate creosote treated timber piles. The objective was to encapsu- late the timber and prevent the leaching of creosote into the water. The coating had to provided high impact and abrasion capability along with excellent adhesion and permeability ratings. This and relat- ed applications could provide a valuable solution for environmentally sensitive areas.
