View non-flash version
Ship Repair & Conversion (Continued, from page 25) The ability to get ships fixed quickly and correctly is particularly important to the cruise industry because of it tight itinerary schedule — extra time at the drydock results in lost revenue and pas- senger capacity. According to Stewart, the work on Millennium shaved off con- siderable amounts of time as a result of NNS' ability to lie out all the materials needed on the dock prior to the ship's arrival. Materials were produced on-site via the yard's computer aided design and manufacturing system and its massive 300,000 sq. ft. machine shop. "We can muster the resources to do anything." Stewart said. "We sometimes sub-con- tract work, such as painting and blasting, but the majority of the work is done in- house." On the Forefront When MR/EN visited NNS in mid- October, it was not perceptible that the U.S. was in the midst of an economic downturn. The yard was abuzz with activity — both on the repair and new construction sides. On the repair front, two vessels — the 821 x 105.5 ft. (250 x 32.1 m) Carnival Victory and 893 x 116 ft. (272.1 x 35.3 m) SS PFC Eugene A. Obregon - were in the yard for regulato- ry, as well as cosmetic work. Sitting in Dry Dock No. 12 for a 10-day availabil- ity was Victory, which was undergoing underwater hull blasting and painting, replacement of shaft seals, propeller and rudder inspections, open and inspection of sea valves and renewal of transitional frames in way of port and starboard sta- bilizers. Situated in the yard's floating Dry Dock No. 1 was MSC prepositioning ship Obregon, which carries ammuni- tion, supplies and military vehicles. The vessel, which is being chartered through Waterman Supply, has a 23-day avail- ability at the yard for hull and deck preservation; ballast and cargo preserva- tion; stern ramp preservation and over- haul; crane overhaul; boiler re-tubing; main and emergency generator mainte- nance; cargo crane and ramp testing; and regulatory body inspections via its clas- sification society, ABS. The vessel will return to Jacksonville, Fla. upon its departure from NNS. The ship, which is the second of a three-part repair contract granted to NNS by Waterman Supply, followed SS SGT Matej Kocak, which visited the yard in August. The final vessel of the series, SS Major Stephen W. Pless is expected to visit NNS sometime during December. According to shipyard superintendent, Joe Adams, the rotor on the vessel's steam turbines will be replaced, as well as underwater hull and freeboard repainting. The vessel's helo and bridge November, 2001 decks will also be repainted. Adams added that since the vessel is more than 20 years old, regulatory work needs to be performed every two-to-three years — such as the cleaning and mucking out of its 12 ballast tanks, and blasting and painting of anchor chains. Peel Strip Remove An improved method for removing paint, rust, adhesives & coatings from concrete. Aurand tools literally "peel" any accumulation from any hard surface. Here is the power of sandblasting in a compact, hand-held tool that can be used wherever a hard surface needs to be prepped prior to painting, refinishing or coating. Available in several widths, and in gasoline, pneumatic and electric models. TAKE IT OFF, TAKE IT ALL OFF Since 1937 jAJMtD 1210 Ellis Street Cincinnati, Ohio 45223-1843 (513) 541-7200 • FAX (513) 541-3065 Email: sales@aurand.net • web: www.aurand.net • (800)860-2872 Circle 212 on Reader Service Card or visit www.maritimereporterinfo.com The crewmember you always wanted Since their introduction in 1982, ComNav Autopilots have gained a reputation for top performance and reliability in any sea and weather conditions. ComNav Marine has a broad line of autopilots suitable for all types of vessels. 2001 Autopilot • Water resistant Control Head • Three "Turn" functions • Automatic trim • Two remote ports built-in • Two navigation ports for dual input of NMEA information • Two heading outputs • Selectable steering parameters • Optional rudder angle indicator, up to 4 stations • 3 year Extended Warrantee CnmNnV ComNav Marine Ltd. ' " V #15-13511 Crestwood Place, Richmond, BC, Canada V6V 2G1 (604) 207-1600 www.comnavmarme.com BALLAST Smart Strain Gauge Level Sensor with Generic 4-20mA Output Use one sensor for all shipboard liquid levels This technology has been designed specifically for surviving the rigors of ballast tank continuous monitoring. It weighs less than 2 oz. and is con- structed from 100% pure titanium. • It's the size of your thumb • Accuracy .25% of full scale • 100% Titanium • Weighs less than 2 oz. • ABS/USCG/Lloyds approved • FM Class 1, Div. 1 Intrinsically Safe • Removal without tank entry • No mercury or other contaminants • Interfaces to your existing monitoring system • One sensor for all shipboard liquids: fuel oil, lube oil, fresh water, black water, etc. • Generic 4-20 mA output • Used in 15,000 tanks worldwide Many Options S ELECTRONIC MARINE SYSTEMS, INC. 800 Ferndale Place Rahway, NJ 07065 Call today for more information! 732.382.4344 732.388.5111 lax emsmarcon@aol.com e-mail http://www.emsmarcon.com Circle 221 on Reader Service Card or visit www.maritimereporterinfo.com Circle 240 on Reader Service Card or visit www.maritimereporterinfo.com 29
