View non-flash version
Ship Repair on more than 30 vessels including 10 successful dry dockings on cruise vessels, ferries, containerships, bulk carriers and casino boats. Aside from the ship repair facility, the island of Grand Bahama itself is undergo- ing a significant restructuring period, which is exem- plified by the rapidly expanding harbor. The island has a cruise terminal, RoRo terminal and container port capable of handling one million teu annually, as well as an oil trans-shipment and storage facility with deepwa- ter offshore piers. One of the yard's recent jobs was the dry docking of Norwegian Cruise Lines' Norwegian Wind, which has given other major cruise operators reason to check into this new facility, as it would be useful for some of their vessels operating on Caribbean itineraries. Circle 16 on Reader Service Card Hydrex Breaks Ground with Repair A 262 ft. (80-m) containership from Antwerp had an unfortunate collision in Boston, Mass. with some rocks and ended up with a large number of tears, ranging from one to seven meters, to its flat bottom. Hydrex was called in to propose solutions for the major repair. A team of eight was sent from Hydrex to begin the work in liaison with a local company, which provided backup, equipment and consumables. The work required five different kinds of patches to be welded to the flat of bottom. The largest one was 47 x 4 ft. (14.5 x 1.3 m) and weighed approximately 1,700 kg. Heavy- duty rigging equipment was required to get this into position. The technical work of how to securely attach this to the ship was done by using a total of 170 screw dogs, an alternative procedure Hydrex has utilized around the world. A total of two-km of underwater weld seams were performed by divers to get all the plates securely attached. The plates were designed with two concave surfaces on the inside meeting in the middle. This method allows the inside of the plate to press against the dam- aged area and increase the surface contact and pressure with the flat of bottom, ensuring better contact. Seals were placed all around the contact area and the empty space behind the plates was filled with concrete in order to stabilize it, prevent vibrations, and prevent the liquids in the fuel tank and the ballast tank mixing as the tear ruptured between two spaces. Due to the extent of the damage, requirements for repairs set by class and coastguard were unusually high. Normally, plates of eight-mm thickness could be used when there was only one such tear, but this required 15-mm thick- ness throughout. Coastguard not only gave the crew authorization for the ship to sail back to Europe, but also allowed them to load up the ship again. Circle 32 on Reader Service Card ft www.vanhallhealth.com Are you paying too much for medical bills? Circle 332 on Reader Service Card "We're No.l. The Best." Flexi-Dip Closed Trimode Closed For ullage, temperature and interface sensing, Gauging MMC makes it easy, accurate and user friendly. MMC International Corp. Inwood, New York USA • 1-800-645-7339 Fax:516-371-3134 • Web: www.mmcintl.com • E-mail: mmcinwd@aol.com MMC (Europe) Ltd. • Fax:(01670)738789 • E-mail: mmceurope@email.msn.com MMC (Asia) Ltd. • Fax: (078) 252-0265 • E-mail: mmc.asia@zvcity.com MMC manufactures the world's best selling portable gauging and sampling equipment for petroleum and chemical service. That says it all. June, 2001 Circle 289 on Reader Service Card 13
