View non-flash version
Finnish Maritime Report As a progression on thruster technolo- gy, the basic principle is that the con- ventional shafting, propeller and rudder system is replaced with a 360-degree rotatable thruster unit also encapsulating the electric motor. Space savings are thereby achieved within the hull, while the efficiency losses from reduction gearing, long shaftlines, rudders, stern thrusters and also brackets and bossings are eliminated. The first cruise ship application of podded electric drive was Carnival's 70,400-gt Elation, commissioned in early 1998 and fitted with two 14-MW. Finnish-developed Azipod propulsion units. Current newbuild references include the entire Carnival group pro- gram, Royal Caribbean's prestigious Project Eagle series, as well as Hapag- Lloyd's Europa, all at KMY yards. As a measure of its influence, the Azi- pod system figures in each of the sub- stantial number of cruise ship newbuilds currently in hand and on order at KMY. By mid-1999, confirmed orders for the device had totaled 40 units of an aggre- Maritime Human Factors Conference 2000 CONFERENCE OBJECTIVES: • Review and discuss current human factors issues in the maritime and oflshore industries. • Present recent success stories including approach taken, solutions, and benefits or impacts realizecf. • Provide tools and information that will facilitate human factor action plans, OSHA programs, and elements of SOLAS Chapter 9; the ISM Code. Using the model proposed by Gerry Miller, CPE, "The Triangle of Effectiveness," the factors affecting the probability of human error will be discussed with the focus on recent work and solutions attendees may use to effect similar improvement. SPEAKERS INCLUDE: Human factor professionals from the Maritime Administration, US Coast Guard, American Bureau of Shipping, NASA, University of Pennsylvania, Ohio State University, Rensselaer Polytechnic University, US Navy, Tabak & Mellusi, the NTSB and others. CONFERENCE INFORMATION: March 13 & 14,2000 • MITAGS, Linthicum,MD FOR REGISTRATION INFORMATION CALL MARY MATLOCK AT: (443) 989-3246 or (410) 859-5700 admissions@mitags.org CONFERENCE SPONSORS: ^iy THE MARITIME INSTITUTE T^O Of TECHNOLOGY AND /V GRADUATE STUDIES •jJr (MITAGS) HFG THE HUMAN FACTORS GROUP Circle 263 on Reader Service Card MACHINE & FABRIC AT OR S„,. Specializing in Deck Equipment • CAPSTANS • MOORING WINCHES • WINDLASS'S • CRANES • LIFEBOAT SYSTEMS • RESCUE BOAT SYSTEMS • DAVITS AND WINCHES USCG / ABS / SOLAS APPROVED Ph: (904) 428-3215 Fax: (904) 423-9480 202 N. Flagler Ave. / P.O. Box 358 Edgewater, Florida 32132 E-Mail: edgemach@aol.com Circle 223 on Reader Service Card V, Barnacle, Paint, and Rust Remover Rapidly remove paint, rust, scale, barnacles, and other hard coatings from metal and concrete surfaces without heavy pressure. New Swirl-Off scarifier attaches to your grinder, sander, drill, or polisher. Rotary tool scours tough deposits. Using pneumatic tools, it removes marine growths underwater. Easier, faster, and safer than scraping, sandblasting, or chemicals. There's nothing else like it! Ask for Bulletin MAR-1 showing many models and styles. 131= £51VI CD INI 13 The Desmond-Stephan Mfg. Co. P.O. Box 30, Urbana, Ohio 43078 Phone 937-653-7181, Fax 937-653-5511 ^'Trademark of The Desmond-Stephan Mfg Co . Circle 220 on Reader Service Card Essential gear for vour boat Since their introduction in 1982, ComNav Autopilots have gained a reputation for top performance and reliability in any sea and weather conditions. ComNav Marine has a broad line of autopilots suitable for all types of vessels. 1001 Autopilot • Water resistant Control Head • Three "Turn" functions • Optional full function remotes • Easy course changes • Accepts NMEA information • Selectable steering parameters • Optional rudder angle indicator, up to 4 stations • 3 year Extended Warrantee • Meets CE requirements ComNav ComNav Marine Ltd. 1915 Stainsbury Avenue, Vancouver, BC, Canada V5N 2M6 (604) 872-3000 www.comnavmarine.com Circle 215 on Reader Service Card gate 487,000-kW, including a total of 29 in 13 cruise ship applications. The adaptability of the Azipod tech- nique is implicit in a design range, which extends from just 500-kW to approximately 25-MW. The flexibility and power of the sys- tem was clearly pointed out during sea trials of Royal Caribbean's Voyager of the Seas the world's largest cruise ship which is equipped with three 14-MW pods. During trials, the vessel topped out at 17 knots ... backwards! Wartsila NSD Wartsila NSD is a perennial power- house for shipboard power needs. A dominant force in the many markets it serves, the company is the major player in the medium speed diesel engine mar- ket, with an estimated 28 percent of market share, as well as in the low- speed market, where its Sulzer engines dominate. Owned by Finnish engineering group Metra, the company has led a wave of marine propulsion consolidations in recent years, most notably with the New Sulzer Diesel acquisition of a few years ago. But while much of the focus has been on consolidations, one of the com- pany's more notable hook-ups has been dismantled, as it announced that it and co-owner Cummins Engine Company would split their 50/50 joint venture Cummins Wartsila in early 2000. In announcing the split-up, Metra said the portion of the venture to be transferred to its engine building division Wartsila NSD would generate net sales of about $133.5 million this year, or about two- thirds of Cummins Wartsila's business volume. Splitting the venture, which was formed in 1995, will reportedly cost about $20.6 million. Despite the extra one-off cost, full-year 1999 earnings of Metra's biggest division Wartsila NSD will improve on 1998, but will reported- ly still be in the red. The split up was reportedly to allow the two companies to focus on the engines that best suited their core busi- nesses, to achieve synergies and improve profitability. Wartsila NSD will take over the manufacture, sales and service of the CW200 and CW220 diesel engines, and a plant at Mulhouse, France, and Cummins would take responsibility for the CW170 and CW180 engines and a factory at Daven- try in England. Wartsila NSD would also take charge of global service for engines made by the joint venture's predecessor, SACM Diesel, and the manufacture and servic- ing of UDX engines. The operations transferred to Wartsila NSD would be merged into the company's French sub- sidiary.
