View non-flash version
PRODUCTS SHOWCASE Inmarsat-A and B ship terminals permits multiple voice, fax and data transmissions to be made simultaneously between ship and shore. The multiplexing option takes advantage of Inmarsat-A and B duplex high-speed data (HSD) channels which provide data transmission at 56-64 kbps. The HSD option utilizes multi- plexers on the ship and at the shoreside destination to subdivide the available HSD channel band- with so that it can be used to sup- port multiple telephone, fax and data circuits at the same time. The multiplexers can be config- ured to provide considerable flexi- bility in allocating bandwidth for different applications. The HSD multiplexing option is available with the new MX 2464 Inmarsat-B system and can be added to existing MX 2400 Inmarsat-A ship terminals with HSD capability. For more information on Hughes MAGNAPhone Circle 11 on Reader Service Card Hoffer's Flow System Breezes Through Tests Recent tests on Hoffer Flow Controls flow sys- tem concluded with results within +/- one percent over the range of pres- sures and flow rates tested. Hoffer's Turbine Flowmeter System. Decrease Cost While Increasing Reliability and Safety... with Simple to Install, Maintenance Free Remote Valve Operators (RVOs) Designed to exceed shock, vibration, and corrosion resistance requirements for navel, commercial marine, and industrial applications, Teleflex RVOs are totally reliable in the harshest environments. Teleflex Remote Valve Operator Systems from Triumph Controls, Inc. have been successfully installed on U.S. Navy shipboard applications for over 15 years. Flexible Cable Technology-mechanically transfers rotary on linear motion through complex routings over long distances Simplified Design-requires less time and manpower for installation Helix Cable Drive System-operates in a sealed, permanently lubricated environment to prevent corrosion and eliminate maintenance RVVO: Remote Vent Valve Operator Systems are lightweight, low-protile operators that bolt directly to flanges of 1/4-turn ventilation valves. Systems incorporate a patented override feature at the valve for local fw^'Ris. operations. ABS APPROVED RMVA: Remote Mechanical Valve Actuator Systems for applications requiring delivery of multi-turn or 1/4 turn rotary motion from remote locations. RTVA: Remote Trip Valve Actuator Systems for appli- cations requiring delivery of quick-acting linear motion from remote locations. Systems include a patented shock compensator coupling. For information on your application call 800/523-2432, FAX: 215/699-7080, E-mail: gcurran@triumph-controls.com, or visit our Web site at http://www.triumph-controls.com. TRIUMPH CONTROLS INC 205 Church Road •Tllllhplljj North Wales. PA 19454-0901 '^JflBMP Phone: 800/523-2432 • FAX: 215/699-7080 Hoffer offers CNG flow systems for applications such as pipeline transmission, bulk transfer and the automotive industry for engine testing. Typically, these systems include the gas turbine meter, temperature and pressure trans- ducers, installation kits and a flowstar flow computer with the AGA 8 gas flow calculations. Hoffer also supplies LNG and CNG custody transfer metering systems to both distributors and original equipment manufacturers for bulk distribution. For more information on Hoffer Flow Controls Circle 12 on Reader Service Card New Tube-End Preparation Machines From Wortelboer Th. Wortelboer has unveiled its new PBM-6 and PBM-12 Tube- End Preparation Machines. Clamping is exe- cuted through a self-centering prism-clamp and Th. Wortelboer unveils its new tube-end prepa- ration machines. beveling is performed by fixed- mounted insert holders. The range of the PBM-6 clamping is 1.5-6 in. and the PBM-12 is two-12 in. pipe with outside diameters of 48-170 mm and 60-330 mm, respectively. The turning ranges are 30-170 mm and 40-330 mm, respectively. These models feature high-speed beveling and eliminate the need for changing clamping parts or adjusting insert-holders. For more information on Wortelboer Circle 9 on Reader Service Card Leica Releases DGPS Unit A new, low-cost DGPS Reference Station/Mobile Unit with integrat- ed keypad and display has been introduced by Leica. The 12-chan- nel differential station provides one to three meter accuracies for real-time applications. The MX 9250 is a turnkey, rapidly deploy- able, stand-alone DGPS reference station which is capable of func- tioning completely autonomously without an external computer or specialized software for setup and Hydraulic mum Features: • Hard wearing manganese steel vertical rollers rotating on bronze bushings • Optional tow line hold-down and stern rollers available • 8" and 12" diameter pins now available with 12" or 16" vertical rise • 3,4, or 5 pin models and compact unit available Circle 359 on Reader Service Card Call or Fax for our free brochure WESTERN MACHINE WORKS 1870 Harbour Road - North Vancouver, BC-Canada-V7H 1A1 Phone: (604) 929-7901 Fax: (604) 929-7951 Circle 373 on Reader Service Card