View non-flash version
Emerald Star Added To Waterways Fleet Waterways Cruises, Inc., a char- ter and public cruise company located in Washington state, is adding a new $1.5-million dining and entertainment vessel to its fleet. The addition of Emerald Star is expected to increase the company's charter business by 90 percent. Emerald Star is a 111-ft (33.5-m), 250-passenger dining/ charter vessel that is being trans- ported 2,000 miles overland from Wisconsin to Washington. After a mid-April delivery, the vessel was scheduled to be ready for charters and public cruises throughout Puget Sound and Lake Washington in May. In addition to providing more than 100 charter cruises, Waterways expects to add at least Emerald Star Equipment Moin engines Twin Detroit Diesel 6-71 Tl (310 bhp@ 2,100 rpm) Main generator 75 kW Cummins Bowthruster Westmar (hydraulic) Strews Michigan Wheel/ 4-blade bronze/28x22 pitch DynaQuads Gears ZFIRM225 (2.454:1) Engine mounts Detroit Diesel Propeller shaft coupler Vetus Steering system Hynoutic VHF/FM Icon) Depth sounder Impulse Radar system Furuno Displacement 94 tons Naval architect Elliott Bay Design Group SkipperLiner Industries, Inc Builder SkipperLiner Interior design Interior Design International 100 dining and entertainment cruises in 1996. Emerald Star's interior was designed by Interior Design International, Inc. of Seattle, and combines mahogany and cherry- wood paneling with brass accents. The main deck features a solari- um-style enclosure at the bow of the ship, and seats up to 126 guests for dining. The vessel is powered by twin turbocharged Detroit Diesel 6V92 engines which deliver 810-hp, and is reportedly capable of cruising at up to 12 knots per hour and servic- ing destinations as far as Olympia and the San Juan Islands. Emerald Star was designed by Seattle-based Elliott Bay Design Group, and constructed by SkipperLiner Industries, Inc., in La Crosse, Wis. Emerald Star is one of three ves- sels owned by Waterways, located in Chandler's Cove at the south end of Lake Union. For more information on SkipperLiner Grde 33 on Reader Service Card For more information on Interior Design Int'l. Grde 34 on Reader Service Card Emerald Star Particulars Length 111 ft. (33.5 m) Beam 20 ft. (6.1 m) Hull depth 5.6 ft. (1.7 m) (Continued from previous page) tests were then carried out in Dutch waters. After a total construction period of 17 months, the dredger was handed over to the customer. Nautilus is equipped with the new loading and unloading system developed by Krupp Fordertechnik, which reportedly ensures even loading fore and aft of the hopper by splitting the dredged material in two. For more information on Krupp Fordertechnik Circle 48 on Reader Service Card New Holeby Gensets Delivered To Odense Shipyard MAN B&W Diesel, Holeby, has delivered the Gensets of the L32/40 type to Odense Steel Shipyard Ltd., Denmark, for installation in the third container vessel of a series of mega-container vessels from the shipyard. The Genset is based on the MAN B&W Group's L32/40 medium-speed, 4-stroke engine developed in Augsburg, Germany. ULTRASONIC THICKNESS TESTING CAN BE DONE ON DECKS, BULKHEADS, TANKS & HULL PLATES WITHOUT GRINDING SPOTS IN VALUABLE COATINGS! Coatings DO NOT have to be removed — measures only the metal thickness Do not have to destroy the integrity of perfectly good and costly coatings No costly coating repairs Saves time and money Available in a variety of hand held models Uses the multiple echo measuring technique P.O. Box 3127 Annapolis, MD 21403 ^^ II lapuilO, IVIL/ IH CYGNUS Tel.: 410-267-9771 INSTRUMENTS INC. Fax: 410-268-2013 Can be welded, flame-cut, sheared, drilled and punched through surface. Applications include floor- ing, stairs, ladders, decks, pit covers, ramps, walk- ways, platforms, etc. Call for free sample and complete information: 800/537-3443 W.S. Molnar Company 2545 Beaufait Street Detroit, Michigan 48207 Fax: 313/923-4555 SlipNot® is a trademark of W.S. Molnar. Co. Gilkes J Series Self-priming Marine Duty Pumps... Compare these features: J Series pumps range from 1-1/2" x 1-1/2" to 12" x 12" suction and discharge sizes. Flow rates up to 6300 USGPM and pressures to 140 PSI. TQS version includes cast iron casing with protective zinc anodes, aluminum bronze alloy impeller and wear plate, 316 SS shaft and oil lubricated mechanical seal for run dry protection. TBS version includes all aluminum bronze alloy casing with 316 SS shaft and oil lubricated mechanical seal for run dry protection. Semi open impeller design allows pumps to handle from 3/4" to 3" solids. JV and JL pumps have large impeller clean out ports for removing debris. Large inhouse inventory with off the shelf pumps and spare parts availability. J Series pumps are available in pedestal mount, close or long coupled to electric motors, electro-clutch pulley and manual clutch pulley versions. For more information about Gilkes J Series self-priming marine pumps contact your local Gilkes distributor or call (713) 474-7622 for the distributor nearest you. GlIRlS P.O. Box 1908 League City, Texas 77574 Tel: (713) 554-2335 Fax: (713) 554-6577 Distributorship inquiries welcomed SlipNot Safety Flooring far exceeds 0SHA and UL Standards for safety and slip resistance and out- lasts all competitive mate- rials. USDA approved, SlipNot's patented surface assures maximum adhe- sion and wear. Easily fab- ricated to fit any applica- tion, this fireproof, toxic- fume-free plate or grate doesn't wear, polish or flake off. l] H*1 f? onca and for all. Available in Steel, Alumi- num & Stainless plate or grate with choice of sur- face roughness and finishes. SlipNot Products are designed for new installation or retrofit 90 Circle 414 on Reader Service Card Circle 407 on Reader Service Card Circle 393 on Reader Service Card
