View non-flash version
Zodiac Hurricane RIBs Ideal For Use As Rescue Craft —Literature Offered The RIB design approaches an optimum compromise between the standard rigid hull craft and the inflatable boat. The Zodiac Hurricane Rigid-Hull Inflatable Boat (RIB) combines the wave cutting capabili- ty of a rigid hull with the safety features of an inflatable, creating an ideal rescue boat. Based on a design by Admiral Hoare, former director of England's Royal National Lifeboat Institute, the RIB's standard deep "V" hull is made of fiberglass with an attached inflatable, heat-welded plastomer collar, which gives this hybrid the wave cutting qualities of a rigid hull boat and the safety of pontoon sides. Rescue and enforcement agencies worldwide now recognize the many advantages of a RIB over both the inflatable and rigid-hulled vessels. A 24-foot RIB's ability to safely cut through 2- meter seas at 25 knots, carry up to 15 people, fender off of stricken vessels without damage, and transfer victims with a lower risk of injury make it popular with rescue and enforcement personnel. Zodiac's 75 years of experience in marine and aeronautical fabric construction, and seam weld- ing has resulted in near indestructible pontoons. The pontoons used on Zodiac Hurricane RIBs have met or surpassed the standards of marine safety organizations worldwide including Bu- reau Veritas of France, DIN standard of Germa- ny, and the International Safety of Life at Sea. J.J. Marie, president of Zodiac Hurricane Marine Inc., believes the RIB is ideal for a very wide range of rescue, enforcement, military and commercial use. "The RIB's combination of a wave-cutting hull and safe, tough pontoon sides make it much more versatile than either a stan- dard fiberglass hull or the soft bottomed inflata- ble," he said. The Canadian Navy recently became the third Nato Navy to purchase $100,000 hydrajet- driven Zodiac Hurricane RIBs. The 24-foot RIB can avoid detection by radar, operate in shallow water, and be lifted by only one crane while the mother ship is in motion. For further information and free literature on Zodiac Hurricane RIBs, Circle 6 on Reader Service Card Mid-Coast Marine Lengthens And Modifies Fishing Vessel Pegasus The 90-foot by 27-foot fishing vessel Pegasus is powered by a new 940-hp Cummins main engine. Mid-Coast Marine recently completed the lengthening and modification of the fishing ves- sel Pegasus. Work included lengthening the 75-foot by 23- foot vessel to 90 feet by 27 feet, installing a new 940-hp Cummins main engine, new 6-inch shaft- ing, bearings, shaft log, and four-blade stainless steel wheel. The boat was cut in half near amidship, rolled apart, framed and plated to its original width. At the same time, the bow and stern sections were receiving the framing for the 24-inch spon- sons that were added port and starboard and faired well forward. Mid-body sponson frames and plating were next, rounding out the vessel's new shell. Inside, the old engine room bulkhead was cut out and a new bulkhead built, lengthening the engine room about 8 feet. Aligned along the new shaft line were the new stern tube, shaft alley, and engine rails. Saddle tanks were also built port and starboard outboard of the new main engine location. Back on the main deck, the original bulwarks were reinstalled outboard, and the original rud- der was converted to a contra-guide configura- tion with broad top and bottom plates added. This modification was done to assure that the boat, in its new configuration, would have suffi- cient rudder power. For free literature detailing the boatbuilding services of Mid-Coast Marine, Circle 8 on Reader Service Card Kockums Receives $2.7 Million In Orders For Steerbear Systems Kockums Computer Systems AB recently re- ceived orders totaling SEK16 million (about US$2.7 million) for the Steerbear CAD/CAM/ CIM system from shipbuilding industry. Howaldtswerke-Deutsche Werft AG in Kiel, West Germany has acquired Steerbear general design, pipe and structure to be able to handle both hull and outfitting in Steerbear. They have also acquired a VAX Server 3600 computer and seven graphic workstations. This is a break- through in the German market for Steerbear outfitting systems. Eleusis Shipyards SA in Greece has acquired all Steerbear Systems for hull and outfitting applications, running on a Vax computer and 10 graphic workstations. Lexicon Marine in Sweden has acquired Steerbear hull, a Vax computer and two graphic workstations. Ludvigsen & Hermann in Denmark, a plant design company, has acquired Steerbear general design, pipe and cable, running on a Vax com- puter and two graphic workstations. For more information and free literature from Kockums Computer Systems, Circle 54 on Reader Service Card iCK OFFICER COURSES USCG approval) - RADAR OBSERVER COURSE USCG approved - FIREFIGHTING SCHOOL Also USCG Exam Prep Courtei lor CAPTAIN, MASTER. AB. ENGINEER, 0MED ......031-WJ) S^lSCHOOt f.^1-800-BEST-ONErr Marine Engineers and Naval Architects P.O. Box 338 Essex. CT 06426 P.O. Box 205 Solomons, MD 20688 2 Skyline Place / Suite .311 calls Church, VA 22041 •Telex: 517931 Seaworthysys GEORGE G. SHARP, INC SYSTEMS ANALYSIS NAVAL ARCHITECTS-MARINE ENGINEERS I00 CHURCH STREET-NEW YORK, N.Y. 10007 I3I2] 732-2800 WASHINGTON,D.C. [703] 892-4000 VIRGINIA BEACH.VA. [804) 499-4125 PHILADELPHIA,PA. [6091 772 -0888 TWX:7IO-58l-275S CABLE: GEO SHARP NYK February, 1989 SEFSTEL NAVAL SHIP ELECTROMAGNETICS • Electromagnetic Compatability Design • Combat Systems Integration • Topside Design/Antenna Arrangements • Communication Systems Design SENTEL CORP -6713 Robinia Rd • Camp Springs MD 20748 (301)449-3630 T.UI. SPflETGEnS TORSIONAL VIBRATION SPECIALISTS OUR 42ND YEAR SERVING INTERNATIONAL CLIENTS 156 W. 8th Ave. (604)879-2974 Vancouver, Canada V5Y 1N2 Tele* 0455188 FAX: (604) 879-6588 R.A. STEARN INC. NAVAL ARCHITECTS and MARINE ENGINEERS 253 N. 1st Avenue Sturgeon Bay, Wl 54235 Phone (414) 743-8282 TLX 753166, ESL 62388810 Quality Management, Training, Technical Support, ILS and Marine Engineering Services SYSTEMS ENGINEERING ASSOCIATES CORPORATION 200 EAST PARK DRIVE MT. LAUREL, NEW JERSEY 08054 (609)866-2400 SEACOR is a subsidiary of Day & Zimmermann, Inc. STURGEON BAY MODEL SHOP SHIP MODELS SINCE 1941 phone VYm 1 HprlKt —414/8942859 187 N Ninth Ave DISPLAY S DESIGN 414/743-2921 Sturgeon Bay Wl 54235 « 414/744-309 Trans-International Marine Services Corp. T I M S C O MAINTENANCE MONITORING SYSTEMS INVENTORY CONTROL SYSTEMS P.O. Box 91360 Mobile, Alabama 36691 205/666-7121 W« Logistic ™LConsultants, Inc. INTEGRATED LOGISTIC SUPPORT SERVICES TRAINING, SUPPLY SUPPORT, TECHNICAL PUBLICATIONS RELIABILITY & MAINTAINABILITY STUDIES CONFIGURATION/DATA MANAGEMENT 3008-C BIENVILLE BLVD., OCEAN SPRINGS, MS 39564 PHONE: (601) 872-2766 FAX: (601) 875-6443 MORGAN CITY. LA OFFICE PHONE: (504) 384-6120 VIBRANALYSIS ENGINEERING CORP • PREDICTIVE MAINTENANCE PROGRAMS • VIBRATION ANALYSIS • FIELD & SHOP BALANCE • ACOUSTICAL CONSULTANTS • COMPUTERIZED DATA COLLECTION • MARINE APPLICATIONS VIBRANALYSIS ENGINEERING CORP 4380 S. Wayside, Suite 100 713-643-1051 Houston, TX 77087 -WELDING -CONSULTANTS USA • WELDING ENGINEERS • DESIGNERS • TECHNICIANS 10399 Paradise Blvd., St. Petersburg, FL 33706 (813) 367-7067 FAX (813) 360-9417 Milwaukee, Wl • Houston, TX • Chicago, IL • Norfolk, VA 63 lii.ii ——:
