View non-flash version
final outfitting at McDermott Ship- yard before she goes in service in the Gulf of Mexico. A self-propelled dynamically po- sitioned monohull vessel, DB 50 is designed for worldwide operation in a variety of marine construction roles. She is 495 feet long and 151 feet wide with a depth from keel to main deck of 41 feet. Four 3,000-hp electrically driven azimuthing, con- trollable-pitch thrusters provide propulsion, mooring assistance and full dynamic positioning. Dynamic positioning is controlled by a GEC Uni-Control Duplex DP System rated for all modes of construction work, including DP diving opera- tions. A GEC Tams 80 mooring sys- tem monitors position and anchor lines and has computer-assisted thruster control. She can reach speeds of 11 knots. The ship's main revolving crane is a Clyde Model 80-262-49-33. Its components include a fully active computerized motion suppression and heel compensation system. The crane has a 344.5-foot boom with the main block at 262.5 feet. It is mounted on an 80-foot diameter tub at the centerline aft of the vessel. At full revolving, it has a rated capacity of 3,527 short tons at 82 feet. Her slewing capacity over the stern is 4,189 short tons at a 100-foot radius. The Clyde crane has a fixed rating over the stern of 4,400 short tons at 121-foot radius. Five 2,700-kw, 6,600-V, three- phase, 60-cycle alternators powered by Allen Model S37 diesel engines provide ample electrical power to the entire vessel. The vessel's mooring system is composed of eight 26,460-pound Delta Flipper anchors, each with 7,710 feet of 3-inch diameter 6 x 36 IWRCIPS wire rope on eight single- drum Hagglund anchor hoists. Pow- er for the hoists is provided by four 225-kw electrohydraulic units. The firefighting capacity of the DB 50 consists of four fire monitors located on the main crane mast. Each monitor is capable of sending a 7,900 gpm stream of seawater to a point 500 feet away to a maximum height of 230 feet. The ability to provide such a great volume of water, coupled with the mobility supplied by the dynamic positioning system, allows the DB 50 to furnish excellent firefighting capability to the Gulf of Mexico. For pile driving, the vessel is out- The self-propelled McDermott Derrick Barge 50, reportedly the world's largest monohull crane vessel, has a Clyde main crane with a lifting capacity of 4,400 tons. With a whip hook, the crane's maximum height is 400 feet—the approximate equivalent of a 40-story build- World's Largest Monohull Crane Ship To Be Outfitted At McDermott Yard The world's largest monohull Construction's new Derrick Barge crane vessel, McDermott Marine 50, has arrived in New Orleans for TZelia&ie MARINE WAVEGUIDE COMPONENTS X-LX-3cm Also: 10cm 90° E-PLANE BEND SX-998 H-PLANE BEND m SX-1001, LX-1001 90° H-PLANE BEND SX-999 0 RING KIT o o SX-1002, LX-1002 WAVEGUIDE PRESSURE GAGE SX-1005, LX-1005 DECK FLANGE SX-1008, LX-1008 90 E-PLANE BEND SX-1000, LX 1000 90° TWIST SX-1003, LX-1003 FLEXIBLE WAVEGUIDE SX-1006, LX-1006 ROTARY JOINTS DECK GLAND ASSEMBLY WAVEGUIDE FLANGES SX-1011 SX-LX TRANSITION 9 '» r^4 SX-1004 WAVEGUIDE STANDOFFS SX-1007, LX-1007 SX 1013, LX-1013 SX-1015, LX-1015 ALL COMPONENTS IN STOCK SPACE MACHINE & ENGINEERING CORP. 2346 16th AVENUE NORTH ST. PETERSBURG, FLORIDA 33713 TELE: (813) 323-2221 FAX: (813) 323-2376 TELEX: 556-289 WILDEN AIR OPERATED DOUBLE DIAPHRAGM PUMPS offer • No Electrical Connections • Abrasion Resistant • Self priming • Submersible • Variable volume and pressure • Portable • Simple Clamp band construction • Write for free literature and prices In Water. one stands alone It also stands up to chemicals, grout, resin, oil, glue and low density powders. The heart of the Wilden air-oper- ated double diaphragm pump is its unique air valve which shifts the air supply to both dia- phragms alternately with com- plete reliability under all condi- tions of head and flow. Up to 90% solids and over 250' heads are no problem for the WILDEN PUMP. Our double diaphragm design cuts velocity in pump to half total discharge velocity. The most abrasive slur- ries are handled with ease since there are no seals and no metal to metal contact. Volume is infinitely variable by controlling air flow to pump, from a few gallons per minute to over 14,000 gallons per hour. No pressure relief valve is required and the pump can run dry inde- finitely. Wilden pumps are available with wetted parts in aluminum, cast iron, stainless steel, and Hastel- loy C. Non-wetted parts in alu- minum or cast iron. Elastomers in Neoprene, Buna N, Nordel, Viton®, and Teflon®. WILDEN PUMP & ENGINEERING CO. 22069 VAN BUREN ST., P.O. BOX 845, COLTON. CALIFORNIA 92324 / (714) 783-0621 / TELEX 676-452 31 Circle 275 on Reader Service Card Circle 225 on Reader Service Card Circle 159 on Reader Service Card Maritime Reporter/Engineering News
