View non-flash version
McDermott Gets $48-Million Offshore Contract From Chinese Petroleum Corporation McDermott International, Inc. has been awarded a contract worth approximately $48-million by the Chinese Petroleum Corporation of the Republic of China. The turnkey contract involves engineering, pro- curement, and construction of one drilling and production platform, two wellhead platforms, installation of four subsea wellheads, five plat- form completion wellheads, and lay- ing 40 miles of pipelines in the CBK oil and gas field, 15 miles northwest of Hsin Chu, Taiwan, Republic of China. The platforms, all four-legged, and subsea wellheads will be in- stalled in water depths of approxi- mately 200 feet. Fabrication will be- gin this month and is scheduled to be completed in July. The projected production rates for the field are 56 million cubic feet of gas and 10,000 barrels of oil per day. The offshore pipelines to be laid include 15 miles of 12-inch gas lines, 15 miles of 6-inch oil lines, 4.5 miles of 8-inch flowlines, and 5.5. miles of 6-inch flowlines. McDermott's combination der- rick/lay barge DB-29 will be the pri- mary piece of marine construction equipment used on the offshore por- tion of the project, which is sched- uled to begin in May and be com- pleted by August. For literature containing com- plete information on McDermott International, Circle 12 on Reader Service Card Bay Shipbuilding Lays Keel For Second Of Three Containerships Pool Arctic Alaska Orders Bardex Hydranautics Island Rig Skidding System Pool Arctic Alaska Anchorage has contracted with Bardex Hydranau- tics for a rig skidding system which Pool Arctic Alaska will use for Sohio on the Endicot artificial island pro- ject in the Beaufort Sea. The system will perform transverse rig skidding over the wellheads on an Arctic wheel-mounted rig and will be re- quired to operate in —60 degrees F conditions. The rig is skidded back onto the wheels for proper road bal- ance. The order comes on the 20th an- niversary of the first use of such equipment on a major man-made island project—THUMS off Los Angeles. Bardex Hydranautics sup- plied the system, which is still in operatin there, that skids the der- rick, triple-deck sub-base and cas- SURVIVAL SUITS by SURVIVAL INTERNATIONAL, INC THE INDUSTRY LEADER • BEST DESIGNED • HIGHEST QUALITY • LOWEST COSTS Write Today For information Survival International 7859 S. 180 St. Kent. WA 98032 (206) 251 8880 Keel-laying ceremonies were held recently for the second of three con- tainerships being built for Sea-Land Service, Inc. by Bay Shipbuilding Corp. The laying of the keel of Hull No. 736 took place in Bay's large graving dock where all three vessels will be constructed. Each container- ship will be 710 feet in length, 78 feet in beam and have a design draft of 30 feet. Sea-Land Service, Inc., a subsid- iary of Sea-Land Corporation, will operate the three fuel-efficient die- sel-powered containerships between the Pacific Northwest and Alaska. The 20-knot vessels, each capable of carrying over 700 containers, will significantly increase Sea-Land's cargo-carrying capacity in the Alas- ka trade. The keel for the first container- ship, designated Bay Shipbuilding Hull No. 735, was laid in August of 1985. Circle 137 on Reader Service Card ing rack on curved skid beams. The company has since been involved in many other cluster drilling projects around the world. Bardex Hydranautics is head- quartered in Goleta, Calif., with of- fices in London, Singapore, and Houston. The company designs and manufactures heavy-load moving equiment for offshore and shipyard- related activities. For literature containing full in- formation, Circle 32 on Reader Service Card Lavino Shipping Awarded $79.7-Million Contract For MSC Ship Operation Lavino Shipping Company Incor- porated, Philadelphia, Pa., is being awarded a $79,750,778 fixed-price contract plus cost reimbursables for the operation of 12 Military Sealift Command oceanographic ships. The contract period is three years begin- ning in February 1986. One hundred fifteen bids were solicited and four offers were received. The Military Sealift Command, Washington, D.C., is the contracting activity (N00033-84-C-4005). Navy Awards $23-Million Modification To General Dynamics General Dynamics Corporation, Electric Boat Division, Groton, Conn., was awarded a $23,000,000 modification to a previously awarded cost-plus-fixed-fee con- tract by the Naval Sea Systems Command for design engineering services and prototype hardware for the Submarine Improved Perform- ance Machinery (SIPM) program. The work will be performed in Groton and is expected to be com- pleted September 30, 1986. The contract number is N00024-83-C- 4181. KEEL LAYING HULL-736 NOVEMBER 6, 1985 710 FTX 78 FT.X 46 FT. 3IN. D-7 C0NTAINERSHIP BUILT FOR SEA-LAND SERVICE,INC. BY BAy SHIPBUILDING CORP. SUBSIDIARY OF THE MANITOWOC C0MPANV,INC.I Present at the keel-laying ceremony held for the second of three containerships being built for Sea-Land Service, Inc. by Bay Shipbuilding Corp. were, from left: Dave Dettman, super- intendent construction/Sea-Land Project, Bay Ship; John Tomkins, chief estimator, Bay Ship; Robert Miller, vice president/director of engineering, Bay Ship; Harry Taylor, princi- pal surveyor, American Bureau of Shipping, Sturgeon Bay; Bruce Shaw, director of opera- tions, Bay Ship; Per Von Der Fehr, senior technical advisor, Burmeister & Wain, Denmark; Robert Zimmerman, shipyard representative for Sea-Land; Alex Reid, project manager/ Sea-Land Project, Bay Ship; Richard Lindemeyer, shipyard representative for Sea-Land; Charles Pitcock, assistant director of operations, Bay Ship; Lt. Comdr. Robert Arnett, executive officer, USCG, Sturgeon Bay; and Comdr Daniel Struck, OCMI, USCG, Sturgeon Bay. Omnithrusters Delivered For Canadian Government Vessels Omnithruster Canada Inc. of Sar- nia, Ontario, a subsidiary of Omni- thruster Inc. of Santa Fe Springs, Calif., in recent months has deliv- ered four units for installation in Canadian government vessels. The John P. Tulley, a 226-foot hydrographic survey vessel owned by the Canadian Department of Fisheries and Oceans, is fitted with an Omnithruster JT 8001 500-hp horizontal unit forward and a JT 700 350-hp unit aft. The CCGS Narwhal, built by Ca- nadian Vickers (now Versatile Vick- ers of Montreal) in 1963, is undergo- ing a complete refit at Halifax In- dustries. A full machinery upgrad- ing includes an Omnithruster PV 700 unit. The new Canadian Coast Guard Type 1050 navaids tender/light ice- breaker being built at the Nova Sco- tia shipyard of Pictou Industries, a division of USL International, is be- ing fitted with an Omnithruster JT 950 unit manufactured in Sarnia. Reliance Electric of Stratford, On- tario supplied the 750-hp motor for this unit, and Byron Jackson of Hamilton the pump. Basically, the Omnithruster hy- drojet unit consists of a protected intake in the bottom of the hull leading to a low-pressure, high-vol- ume pump. This in turn delivers water through high-pressure direc- tional nozzles in the ship's side. The low location of the intake is unaf- fected by the vessel's trim, and the relatively low velocity of the intake is less affected than conventional thrusters by the ship's speed in rela- tion to the surrounding water. The action of the thruster being against the ship and not the outside water means that it operates efficiently whether submerged or not. Changes in direction of thrust from port to starboard are activated by valves controlling the flow of water, not by reversing the motors. This greatly reduces vibration and noise potential. A bonus is that out- flow, even without air injection that can be induced, can be used as hull lubrication for navigation in ice. For free literature on Omnithrus- ter's line of thrusters, Circle 16 on Reader Service Card 18 Maritime Reporter/Engineering News
