View non-flash version
Partial list of PRC marine products Product Description Product Description Deck Coating Proreco®I Interior Deck Coating System Proreco® III Weather Deck Coating System Impact and abrasion resistant elastomeric coating Fire retardant Has electrical insulation properties Decorative color chips and non-slip types available. Impact and abrasion resistant, elastomeric non- skid coating for use over primed wood, steel or aluminum decks. Polyurethane. Both deck coating systems include corrosion resistant primer, base coat non-skid or decorated topcoats. Military Approval: U S. Navy Technical Manual. Chapter 634. Deck Coverings Caulking Proreco® Marine Rubber Calk™ PR-365-H Rubber Calk" 3095 Sealant PR-7091 A complete all purpose marine caulk, for use above and below the water line. One-part polysulfide One-part, used when fast cure, structural strength and adhesive bonding is required Polyurethane Two-part self-leveling sealant, used as a caulking and bedding compound Polyurethane MIL-S-24340. One-part bedding compound Putties, PR-615-HF Tapes, Adhesives PR-945 PR-380-M Chrome-Lock1 Type N Felt Tape One-part, fire retardant. moldable. damming compound Nonsag. soft, workable noncuring putty. MIL-I-3064A Two-part, elastomeric. chemically curing adhesive with excellent adhesion to properly prepared metal plastics wood and ceramic surfaces Epoxy Two-part, fuel resistant adhesive, with high cohesive and tensile strength Resistant to fuel, oil and weather Polysulfide Anti-corrosion, anti- electrolysis impregnated wool felt for tape and cut gasket uses in flanges and tape joints. MIL-G-20241C PRC ", 'Chrome-Lock'' and "Proreco" are trademarks of Products Research & Chemical Corporation registered with the U.S. Patent Office. "Rubber Calk" is a trademark of Products Research & Chemical Corporation Protective PR-475-S Coatings PR-1539-US PR-1120 PR-1005-L PR-1436-G Sprayable Sprayable. abrasion resistant coating for the protection of insulating materials such as foam, fiberglass Polyurethane. Sprayable. fire-retardant. abrasion resistant coating Polyurethane Two-part, anti-corrosion all purpose coating for fuel, ballast and CHT tanks. Polyurethane. MIL-P-23236. One-part, highly flexible synthetic rubber, used as protective tank coating for metals, and synthetic rubber sealants MIL-S-43838 (2) Two-part, corrosion inhibitive. fuel resistant coating Polysulfide. MIL-S-81 733 Electrical Insulating PR-1201 -Q PR-1568 PR-1547 PR-1539-U Two-part, general purpose flexible potting and molding compound for electrical connectors. Elastomeric, fuel resistant Polysulfide. MIL-S-8516E (2) One-part, thin film, moisture and heat resistant coating for electrical circuit board applications. MIL-I-46058C (2) Two-part, high performance, high temperature resistant compound for potting, molding and encapsulating. Polyurethane. MIL-M-24041. Abrasion resistant insulating deck covering for use in electronic and electrical areas. This is only a partial listing of the many superior PRC products available. Detailed information on these and other PRC products is available on PRC Technical Data Sheets. Write or call Rodney N. Morris, Marine Market Manager. Products Research & Chemical Corporation 5430 San Fernando Road. P.O. Box 1800 Glendale. CA 91209 (213) 240-2060 November 1, 1983 Write 605 on Reader Service Card 13