View non-flash version
60 MTR November 2006 1140 or visiting www.csum.edu. Send application documents with appropriate address, phone number, and fax number to: HUMAN RESOURCES, JOB BULLETIN #14- 06/07 T. BENCH, FACULTY HUMAN RESOURCES ANALYST CALIFORNIA MARITIME ACADEMY 200 MARITIME ACADEMY DRIVE VALLEJO, CA 94590-8181 DISCLAIMER: The provisions of this bulletin do not constitute an expressed or implied contract and any provisions contained in this bulletin may be modified or changed. The California Maritime Academy is commit- ted to a diverse work force and equal oppor- tunity employment T. Bench California Maritime Academy 200 Maritime Academy Drive Vallejo, CA 94590 USA Phone: (707) 654-1136 Fax: (707) 654-1141 Email: tbench@csum.edu WEB: http://www.csum.edu FIELD INSTALLATION ENGINEER Job Location: USA, VA Norfolk Growing automation & systems integration company is seeking an experienced field engi- neer for Navy ship installations. The success- ful candidate will: Participate as a member of a team or work alone during the installation & start-up of instrumentation and control equip- ment aboard Navy ships. Work closely with ship alteration contractors by providing over- sight & management of installation activities. Provide guidance & training to customer per- sonnel in establishing procedures and tech- niques. Analyze equipment failures to deter- mine cause & recommend corrective action. Advise & assist in effecting design changes. Participate in the installation planning phase. This position requires an in-depth knowledge of ship electrical, piping & structural modifica- tions for installation of new equipment. Candidate must be familiar with reading & interpreting complex ship installation draw- ings. Must have a thorough understanding of proper procedures dealing with shipboard installations in a shipyard environment. 4 years of ship installation design and installa- tion management experience desired. 2 posi- tions available, based in Norfolk VA or San Diego, with expected travel of up to 25%. www.nagllc.com Wayne Morlatt Naval Automation Group 2511 Walmer Ave Norfolk, VA 23513 Phone: 800-830-5186 Fax: 757-852-3998 Email: jobs@nagllc.com WEB: http://www.nagllc.com MARINE GEOSCIENTIST Job Location: USA, WA Seattle The Marine Geoscientist is responsible for seabed sample collection, data interpretation and/or reporting in regards to company desk- top studys and survey projects. Specific responsibilities include: ¦ Coordinate technical investigations with sen- ior management and clients. ¦ Geological and geophysical sample collec- tion, data interpretation and reporting dur- ing offshore and onshore operations. ¦ Prepare desktop studies, project plans, sur- vey procedures and other documents required to support survey activities. ¦ Conduct site visits to determine the accept- ability of a site for a cable landing. ¦ Select locations, analyze and document seabed samples (cores, dredges, grabs, etc.), ¦ Ensure conformance to quality criteria, pro- fessional standards and contract specifica- tions for all aspects of survey project, both on- and offshore. Applicants MUST be US Citizens or POSSESS authorization to work in the US, and have an MA/MSc in geology, oceanography, or related field AND five years applicable experience. Carrie Higley-Krowka Fugro Seafloor Surveys, Inc. 2727 Alaskan Way - Pier 69 Seattle, WA 98121 Email: hr@seafloor.com WEB: http://www.seafloor.com CONTRACTS MANAGER/BUSINESS DEVELOPMENT Job Location: USA, WA Seattle The Contracts Manager reviews and responds to all Requests for Quotations (RFQs) and coordinates contract budgeting, proposal preparation, and contract negotiations with FSSI marine survey customers. This requires constant contact with existing and potential clients with the purpose of expanding FSSI's international market share of the marine sur- vey, research and development, and data management industries. Specific duties include: ¦ Review and respond to Request for Quotations (RFQs), coordinating all contract budgeting, proposal preparation, and con- tract negotiations for FSSI. ¦ Assume daily responsibility for compliance with terms and conditions of all contracts. ¦ Oversee all US and international business authorizations including import/export pro- cedures and requirements, survey and ves- sel permitting, customs and clearance of FSSI equipment and personnel. ¦ Maintain direct and frequent contact with existing and potential international clients. ¦ Maintain commercial and marketing commu- nications within the Fugro Group of compa- nies and develop FSSI's role in supporting and utilizing the Fugro network. ¦ Coordinate FSSI's roll in joint Fugro Group business endeavors. ¦ Provide commercial support to FSSI project managers and survey operations. ¦ Coordinate banking needs with the FSSI Controller. - Stay generally informed about the business- es of FSSI to perform administrative, opera- tional and executive functions in the absence of the company President. Applicants MUST be US Citizens or POSSESS authorization to work in the US; have a mini- mum of 5 years of extensive international marine survey administrative experience. An MBA is a strong asset. Additional experience should include applicable general business management in the marine surveying environ- ment. Carrie Higley-Krowka Fugro Seafloor Surveys, Inc. 2727 Alaskan Way - Pier 69 Seattle, WA 98121 Email: hr@seafloor.com WEB: http://www.seafloor.com SEAGOING ELECTRONICS ENGINEER Job Location: USA, WA Seattle We are seeking someone with mechanical and electronics aptitude and five or more years experience to operate and maintain a variety of state-of-the-art survey equipment in a physically demanding environment. This position requires 3 to 4 months per year at sea and includes assisting with vessel mobilization & demobilization, equipment assembly, operation, repair and maintenance of proprietary and third party survey systems. This position also provides technical support on development of state-of-the-art marine sur- vey systems projects, and participation in onshore inspections, maintenance, testing and calibration of equipment. Applicants MUST be US Citizens or POSSESS a valid visa for work in the US; and have a BSc in Electronic Engineering or the equiva- lent. Carrie Higley-Krowka Fugro Seafloor Surveys, Inc. 2727 Alaskan Way - Pier 69 Seattle, WA 98121 Email: hr@seafloor.com WEB: http://www.seafloor.com SUBSEA MANAGER / ENGINEER Job Location: Singapore Job Description: ¦ Candidate will be part of the FPSO Project Management Team for the preparation of subsea facilities operations, covering the flowlines / pipelines, subsea equipment, and FPSO hull / subsea interface. ¦ Candidate shall provide input to the client's field development design, FATs, construc- tion / pre-commissioning, commissioning and hand-over activities in liaison with the other project team members. Requirements: ¦ Ideally be degree qualified in an Engineering disciplineo ¦ Minimum of 10 years experience in subsea engineering. ¦ Good understanding of: Subsea Control Systems, Flexible Flowlines, Umbilicals and Subsea Structures (manifolds/wellhead/xmas trees/PLETs) ¦ Experience in Oil and Gas Industry ¦ Experience in multi-national working environ- ment is desired ¦ English speaking and writing ¦ Competent in the application of IT packages including MS Word, Excel and Powerpoint. Responsibilities ¦ Reports to Project Manager. ¦ Responsible to prepare a safe, technically sound and timely startup of the field subsea facilities. ¦ Participate in the start-up / performance test phase. ¦ Provide assistance for subsea production to achieve optimized overall performance (HSE, production, subsea facilities opera- tions) during the startup of the project. ¦ Responsible for all subsea systems from bid development, contracting, design, fabri- cation, installation, commissioning through to handover. Alvin Nadel EnergySkills Email: alvin.nadel@energyskills.com.sg WEB: http://www.energyskills.com.sg PROJECT ENGINEER Job Location: USA, FL Daytona Beach Essential Duties and Responsibilities: ¦ The main purpose of this position is to man- age and perform the engineering design and development of ODI's products. ¦ Perform project level design and develop- ment of ODI products using CAD and con- ventional engineering techniques. ¦ Generate supporting documentation for designs, including assembly and test proce- dures. ¦ Regularly interface with customers to devel- op business in new and existing markets. ¦ Generate, review and approve supporting documentation for designs, including assembly and test procedures. ¦ Apply project management skills to ensure timely completion of projects ¦ Provide engineering support to other departments, as required. ¦ Follow and contribute to the development of ODI procedures, accepted engineering practices, and any relevant design prac- tices in accordance with given require- ments. ¦ Work with project/accounts managers. ¦ Perform other duties as assigned by Engineering Manager. Education and Experience ¦ BSME or related Engineering Degree (Masters Preferred/PE a plus) o 3-6 years experience in mechanical design engineer- ing Job Knowledge, Skills and Abilities ¦ Working knowledge of CAD/CAE (AutoCad and SolidWorks preferred) o Experience with electrical systems and fiber optics is desirable o Excellent organizational skills o Excellent verbal & written communication skills o Ability to handle multiple tasks in fast paced environment Physical Demands ¦ Ordinary office capabilities Cheryl Perreault Ocean Design 1026 N. Williamson Blvd Daytona Beach, FL 32114 Phone: 3862360780 Fax: 3862360894 Email: cperreault@odi.com WEB: http://www.odi.com MATERIALS SUPERVISOR Job Location: USA, FL Daytona Beach Essential Duties and Responsibilities: ¦ Oversee the various planning aspects of the company to assure customer expectations are met. ¦ Proactively review orders throughout the process to identify, coordinate and commu- nicate the activities required to achieve cus- tomer expectations and company objec- tives. ¦ Monitor the various areas of receiving, receiving inspection and inventory control to make sure that all procedures are being followed and to revise procedures as required. ¦ Support on-time performance of all shop orders through prioritizing and managing material flow to the production floor. ¦ Over-see and prioritize, as needed, all mate- rial handling and inventory activities. ¦ Work closely with planning, production and purchasing to support the production schedule. ¦ Ensure accurate and appropriate levels of inventory, including consumable supplies. ¦ Supervisory duties, including scheduling, attendance and performance monitoring. ¦ Maintain excellent communication and work- ing relationship with all departments within the company. ¦ Comply with, and assist in the enforcement of all company safety policies. Education and Experience ¦ Associates Degree in related field is required. BS/BA is desirable o Must have minimum of 2 years experience in Inventory Management. Production Planning and Procurement experience preferred. ¦ Supervisory experience required. ¦ CPIM certification required. Job Knowledge, Skills and Abilities ¦ Proven Project management skills MTR MARKETPLACE • JOBS WWW.SEADISCOVERY.COM MTR#9 (49-64).qxd 11/13/2006 4:30 PM Page 60
