View non-flash version
FREE INFORMATION on products is available online at www.maritimeequipment.com/mt products IXSEA's PHINS 6000 with DVL Ready IXSEA recently launched PHINS 6000 with DVL Ready option, the latest version of IXSEA's subsea Photonic Inertial Navigation System. This fully calibrated system with a DVL interface is designed to improve the USBL rejection filter for noisy environments (multi transponder) and has an LBL protocol. It is based on Fiber Optic Gyroscope (FOG) technology coupled with a digital sig- nal processor, which runs a Kalman filter especially developed for marine applications. Visit www.maritimeequipment.com/mt & Click No. 19 IXSEA Launches Enhanced OCTANS IXSEA launched a new version of OCTANS, the IMO certified survey grade gyrocompass and full motion sensor, which is now Ethernet and wireless compatible. OCTANS now with Ethernet interface allows users to connect it to their network and any instrument or computer connected to this network will then be able to access its data. OCTANS is config- ured with Ethernet compatible repeater software that allows any Ethernet network connected PC users to configure OCTANS. In addition, OCTANS is able to provide real-time data at 200 Hz refreshing rate and to synchronize on UTC time using PPS and ZDA message from a GPS receiv- er. Visit www.maritimeequipment.com/mt & Click No. 20 Sonardyne Launches AvTRAK 2 Sonardyne International Ltd. launched a new acoustic positioning and communications instrument for Autonomous Underwater Vehicles (AUVs). AvTrak 2's comprehensive command language allows the vehicle to undertake a variety of survey tasks from LBL ranging, USBL tracking via a surface vessel and robust and high speed telemetry for AUV-to-surface and AUV-to-AUV communications. AvTrak 2 aims to provide the AUV designer with absolute position refer- ence data to constrain the drift in his inertial navigation systems. Visit www.maritimeequipment.com/mt & Click No. 21 New Tsunami Detection System A system for providing advance warning of tsunami waves has been developed by Sonardyne International Ltd. The Tsunami Detection System can be deployed on the seabed in the deep ocean from where it will monitor the pressure of the water above it. A tsunami wave in deep water creates a small but meas- urable change in pressure that will be maintained for as long as 20 minutes. By monitoring any such changes caused by a tsunami, the subsea detector will trigger an alarm that sends an acoustic warning message to a buoy-mounted transceiver on the surface. The transceiver, in turn, relays the message via a satellite data link to a control center. Visit www.maritimeequipment.com/mt & Click No. 25 Aquatscat 1000 Launched The AQUAscat acoustic backscatter system has passed through several generations since the AQ62 and AQ115 single- board PCbased data log- gers with a 20MB hard disk were first developed in 1992. The AQUAscat 1000 was launched at Oceanology. It transmits high frequency sound at up to four different fre- quencies, using aligned transducers. It records the sound scattered back by www.seadiscovery.com Marine Technology Reporter 59 MTR#4 (49-64).qxd 5/8/2006 10:37 AM Page 59
