View non-flash version
60 MTR September 2005 COMMERICAL CERTIFIED DIVER Job Location: USA, OR Portland We are currently accepting resumes for expe- rienced certified divers, requirements are as follows: • A Min. of 5 Years Diving Experience. Topside and Underwater Welding, Propeller Repair & Polishing, General Marine Services & Light Marine Construction. Must be willing to relocate. This is a full time position. If You Meet Our Requirements And Are Interested In Applying Please Send Resume By Fax To: (503) 286-2871 or Email To: devi- nesalv@msn.com Marvin Smith Fred Devine Diving & Salvage Co. 6211 N Ensign Street Portland, OR 97217 USA Phone: 503-283-5285 Fax: 503-286-2871 Email: devinesalv@msn.com WEB: http://www.freddevinedivingandsal- vage.com DESIGN ENGINEERS Job Location: New Zealand, Auckland High Modulus (NZ) Ltd is a world leader in composite engineering for the marine indus- try. We are currently expanding our Design Engineering Department and are seeking Intermediate and Senior level composite design engineers to work in our head office in Auckland, New Zealand. Job Overview: Structural analysis and design of sailing and motoryachts in composite materials. The job also entails work in the R&D area, some yard visits and a significant amount of client con- tact. The Person: Applicants should be tertiary qualified engi- neers with at least three years experience in naval architecture and/or composite structur- al engineering. Those with established design experience and the ability to work in a team environment would be preferred. Practical boatbuilding experience would be an advan- tage, as would a personal interest in boating. Candidates wishing to apply should send a C.V with covering letter to: Contact: Evelyn Craig Company name: High Modulus (NZ) Ltd Address: Private Box 302-191, North Harbour, Auckland, New Zealand Email: engineer@highmodulus.co.nz Website: http://www.highmodulus.co.nz/ Engineering Office Manager High Modulus (NZ) Ltd Private Box 302-191 North Harbour Auckland, New Zealand Email: engineer@highmodulus.co.nz FACILITIES TECH Job Location: Bahamas, Lee Stocking Island The Perry Institute for Marine Science (www.perryinstitute.org), a US non-profit organization that has been successfully run- ning a marine biology research facility in the Bahamas since 1970, is seeking an energetic self-disciplined Facilities Professional for its marine research center located on Lee Stocking Island, Exuma, Bahamas. This is an on-island analytical problem-solving position involving all aspects of daily facility mainte- nance operations of a large self-supporting remote island. The ideal candidate will have hands-on maintenance experience with gener- ators, electrical distribution systems, utilities, including water and wastewater systems, HVAC, refrigeration, marine diesel and out- board engines, vessel repairs/outfitting, heavy vehicles and equipment, fundamental construction, project management and com- puter knowledge. This is a hands-on position and the ideal candidate must be flexible with priorities, able to juggle between multiple demands, be relentless about work being done correctly, able to work outside in very warm conditions for a large part of the day. A team-oriented attitude is also required. This is a great challenge for great adventure for the right individual. Salary is commensurate with experience and additional compensation includes housing, utilities, travel, partial relo- cation, medical/dental coverage, vacation, and retirement benefits. No pets. Range is $32,000 to $36,000 DOQ. Fax resume with coversheet including salary requirements to: 561-741-0193 EOE/DFWP. Ruth Ann Gonzalez Perry Institute for Marine Science 100 North US Hwy One #202 Jupiter, FL 33477 USA Phone: 561-741-0192 Fax: 561-741-0193 Email: hr@perryinstitute.org INTERNATIONAL SERVICE MANAGER Job Location: Germany, Hamburg Leading a team of around 40 service engi- neers based in 8 European locations. Resource Management, Quality Control & Qualification to the optimum sattisfaction of our customers would be your task. Oliver Schwarz Pro Nautas GmbH Kutterweg 1 Leer, 26789 Germany Email: oschwarz@pro-nautas.com MANUFACTURING ENGINEER Job Location: USA, CA Oxnard The Manufacturing Engineer is responsible for ensuring the correct manufacturing proce- dures, fixtures and tooling are developed and available for all production activities. The Manufacturing Engineer also assists with cer- tain quality activities, e.g. nonconforming item disposition, procedure writing, problems analyses and recommendations. Performs any other manufacturing engineering func- tions, and assists other departments as needed. Maintains document control, per- forms other general engineering work, and reports as appropriate. Eric Birns BIRNS, Inc. 1720 Fiske Place Oxnard, CA 93033-1863 USA Phone:805-487-5393 Fax: 805-487-0427 Email: ebirns@birns.com WEB: http://www.birns.com/engrmfc1.html MARINE ARCHTECT II Job Location: USA, TX Houston Floatover Analyst Minimum of 8 years experience in motion analysis using MOSES, reduction of environ- mental data, mooring system modeling and design, LMU, DSU loose slot, barge ballast- ing, loads on the LMU/DSU. loads on the fenders, etc. 3-8 years experience Permanent Position in West Houston, Texas. Must be authorized to work in US for any employer. Must be willing to relocate to Houston, Texas Contact Renee Grimes, Technical Recruiter at 713 358 7164 or 800 364 2626 or via e- mail: renee@bwresources.com Renee Grimes Bridgewater Carltech 24 Greenway Plaza #1303 Houston, Texas 77046 USA Phone:713 358 7164 Email: renee@bwresources.com WEB: http://www.bwresources.com MARINE ENGINEERING MANAGER Job Location: Canada, Vancouver 10 years experience in design of ship sys- tems and/or offshore engineering projects, particularly with regard to smaller special- ized commercial vessels Demonstrated capability and experience supervising a team of qualified engineers and technologists Demonstrated capability and experience in preparing and meeting project schedules and budgets Qualifications suitable for registration as a Professional Engineer in the Province of British Columbia, Canada Familiarity with the development and imple- mentation of quality assurance procedures in a design environment Strong inter-personal skills in dealing with Clients, suppliers, and personnel Applicants must: Be capable, creative individuals with strong motivations to provide the highest stan- dards of design for high performance work- ing vessels Be able to work independently or as part of a focussed project team on the widest pos- sible range of ship-design activities Be familiar with rules of major Classification Societies, Canadian and US National Authorities, SOLAS, and IMO Possess strong skills in AutoCAD, Word, and Excel Have excellent written and oral communica- tion skills in English Ken Harford, P. Eng. Robert Allan Ltd. Vancouver, British Columbia Canada Email: kharford@ral.bc.ca WEB: http://www.ral.bc.ca MARINE ENGINEERING TECHNOLOGIST Job Location: Canada, Vancouver Training in the design of Marine Engineering Systems Strong AutoCAD skills Ideally 1-2 years experience in a shipyard or design office Applicants must: Be capable, creative individuals with strong motivations to provide the highest stan- dards of design for high performance work- ing vessels Be able to work independently or as part of a focussed project team on the widest pos- sible range of ship-design activities Be familiar with rules of major Classification Societies, Canadian and US National Authorities, SOLAS, and IMO Possess strong skills in AutoCAD, Word, and Excel Have excellent written and oral communica- tion skills in English Ken Harford, P. Eng. Robert Allan Ltd. Vancouver, Canada Email: kharford@ral.bc.ca WEB: http://www.ral.bc.ca MARINE INSTRUMENT TECHNICIAN Job Location: USA, CA Bodega Bay Bodega Marine Laboratory of the University of California has a current opening available for a marine technician to oversee, maintain and troubleshoot a variety of oceanographic sensors and moorings. For more information, please go to: http://jobs.hr.ucdavis.edu/jm/ViewVacancy?id =3379 Conci Mack Bodega Marine Laboratory 2099 Westside Road Bodega Bay, CA 94923 USA Phone:707.875.2011 Email: cmack@ucdavis.edu WEB: http://jobs.hr.ucdavis.edu/jm/ViewVacancy?id =3379 MARINE MACHINIST Job Location: USA, FL Ft. Lauderdale Must be able to setup & operate manual mills & lathes with a broad knowledge of tools. Fabricate precision replacement or repair parts for all types of marine equipment from all types of metallic and plastic material of various sizes working from blue prints, sketches, samples or other instructions with speed & accuracy with little or no assistance. Be able to accurately use precision measur- MTR MARKETPLACE • JOBS WWW.SEADISCOVERY.COM For information on posting a job on these pages and on the “JOBS” site at www.seadiscovery.com, contact Dale Barnett at tel: 212-477-6700; fax: 212-254-6271; or e-mail: barnett@marinelink.com MTR#2 (49-64).qxd 8/30/2005 7:16 PM Page 60
