November 2005 67
we have explored many options and found that existing
solutions typically do not live up to what they prom-
ise," he said. "Pressure drop and the clogging of tradi-
tional filters, for example, can lead to difficulties with
crankcase pressure level, stability and control."
PureVent, which has been developed by Alfa Laval
and tested by Wärtsilä, represents a new approach to
crankcase gas cleaning in high-capacity situations.
Developed specifically for marine and power plant
applications, it uses centrifugal separation to remove
oil mist and other particles.
As Carlberg explains, centrifugal separation offers
great advantages over filters and other cleaning tech-
niques. "Centrifugal separation achieves a cleaning
level filters cannot hope to match, and they do so with-
out the oily waste associated with filter systems."
From an engine builder's perspective, PureVent is
advantageous, as the compact separator has a size of
just 30 l for any size of engine, and it weighs less than
filter alternatives. Recovered oil can even be recircu-
lated and used for engine lubrication.
PureVent uses high-speed centrifugation to clean oil,
soot and unburned fuel from crankcase gas. The prin-
ciple is similar to that of Alfa Laval's Alfdex, which
has been used since 2002 to clean crankcase gas in
trucks and buses on land.
PureVent consists of a disc stack made from a special
composite material, which is enclosed in an aluminium
housing. Connected to this is an electric motor that
drives the disc stack.
Uncleaned crankcase gas enters at the bottom of the
separator, then it passes into the disc stack. Centrifugal
force presses the oil and soot out between the discs,
allowing it to collect on the inside of the disc stack
housing. This leaves virtually oil-free air, which can be
released into the atmosphere.
For greater environmental benefit, the collected oil
can be recirculated through the separator and used
again as engine lubrication. Alternatively, it can be
drained off for use in the incinerator or stored and sent
for deposit.
In a diesel installation or a standard gas-engine
installation, the cleaned air is released from PureVent
into the atmosphere. However, in a gas engine it is also
possible to route PureVent's output into the engine's
turbocharger. Such a closed system enhances and safe-
guards engine performance, since it eliminates the risk
of turbocharger fouling or oil accumulation in the
intercooler. Most importantly, a closed crankcase ven-
tilation system eliminates all emissions of crankcase
gas.
Circle 15 on Reader Service Card
SeaProtect from Westfalia
Westfalia Separator offers separating solutions to
deal with recent laws and directives emanating from
the International Maritime Organization (IMO) to pro-
tect the ecosystem in the oceans. The new BilgeMaster,
SludgeMaster and
CombiMaster systems
from Westfalia are
designed to secure the
oceans' sensitive
ecosystems effectively
and also provide pro-
tection for the value of
the ship owner's
investment. The main features of the systems are: high
separating efficiency, continuous unmanned operation,
combined with service friendliness, and reduced dis-
posal costs. The systems meet the prevailing statutory
regulations of the IMO with a residual oil content sub-
stantially lower than 15 ppm. With an additional facil-
ity, the BilgeMaster can achieve a residual oil content
of even less than 5 ppm.
BilgeMaster: Performance up to 6000 l/h
The BilgeMaster system is designed for ships that
use high-density residual fuel oils. The system is sup-
plied and installed as a self-contained Centripack unit
incorporating all auxiliaries necessary for operation.
The four available performance classes (BilgeMaster
200, 1500, 3000 and 6000) operate in capacity ranges
of 200 to 6,000 l/h. The centrifuge used in the
BilgeMaster operates with the HydroStop system
Circle 231 on Reader Service Card
Circle 269 on Reader Service Card
Pipes, Pumps & Valves
MR NOVEMBER 2005 #9 (65-72).qxd 10/28/2005 11:26 AM Page 67
Digital Wave Publishing