NEW CHOCKS- CLEATS - BITTS
CAST STEEL
OPEN CHOCKS
Overall length 2' 33A" — fop opening 6" — width 9"
36" - 42" - 48" KEVEL CLEATS
10" DOUBLE POLE BITTS
NEW CLARK 500BHP DIESEL
4-CYL. - AIR STARTING
500 BHP @ 400 RPM. 4-Cylinder straight inline type —
12V2"X16" — 2-stroke single acting — liquid cooled
— direct reversible — CW rotation. With standard shaft-
connected starting air compressor. 46,000 lbs., net
weight—228" long—98" wide—132" high. Designed for
heavy duty, rugged use, its extreme simplicity will
result in lower operating and maintenance costs.
LOW PRESSURE 450 KW
A.C. TURBO GENERATORS
suitable for waste heat
turbo generators on motor ships
For motorship service. 175 PSIG — D&S — 27V vac-
uum. GENERATOR: Westinghouse 450 KW - 563 KVA
- 450/3/60 - 1200 RPM. GEAR: 6097/1200 RPM.
TURBINE: 175 Ibs/D&S — 27 V vacuum. Other pres-
sures & temps: 250 lbs @ 40°C — 27,2" vacuum.
Turbine serial #7801-7802. OAL 13' l?f6" - OAH 5' —
OAW 5' %". Total dry wt. 17,100 lbs. Plans on request.
NEW 5" ALL BRONZE BALDWIN-LIMA
1000 GPM 150 PSI TOTAL HEAD
CENTRIFUGAL FIRE PUMP
Single stage double suction type with 6" side suction
& 5" side discharge. 3600 RPM—test pressure 250 PSIG.
MOTOR: Reliance 125 HP 440/3/60-totally endosed-
fan cooled—Frame D-5003-S—50 0 C.
NEW U.S. MARAD-TYPE
AXIAL FLOW FANS
I
(3) 10,500 CFM Model AF-100, "Baldor" 5 HP motor —
440/3/60 — 40° — 1750 RPM — 7 amps.
(2) 40,665 CFM — size 43AF — 60 HP Baldor Motor —
440/3/60 — 1760 RPM — 75 amps — 50° rise — Frame
364TZ Ins. F
NEW NAVY 12,000 CFM
EXPLOSION PROOF
AXIAL FLOW FANS
Model A12A4X6 with 10/3 HP 2 speed motor.
30 HP—440/3/60—2-SPEED A.C.
MOTOR-DRIVEN CAPSTAN
8500 lbs @ 90 FPM or 4250 lbs @ 180 FPM. Barrel
size 15". Below-deck mounted motor — 31 HP —
440/3/60 - 42/38 amps - 820/1200 RPM. Squirrel
cage — totally enclosed — watertight. Half hour duty
65 °C. temp. rise. Base OAL 6'4". With magnetic
brake, 2-speed control and master switch.
A.C. Motor drive—25/12.5 HP-GE 440/3/60-40°C AB
— 1750 RPM—type KR—full load amps 32. Motor drives
winch through Falk reduction gear. Has compressor
hand brake.
ENGINE: GM 8-268A - 6<2x7 - 1200 RPM. Heat ex-
changer cooled — equipped with heavy duty coolers.
Just overhauled and can be seen running. Good con-
dition.
Length Width Height Weight.
IMMEDIATE DELIVERY
WORTHINGTON 16" X 14" X 18"
VERTICAL DUPLEX STRIPPING PUMP
GENERAL PURPOSE WINCH
3500 LBS AT 200 FPM
300KW GM 8-268A 120/240 DC
DIESEL GENERATOR SET
1 400 GPM @ 110 PSI - suction
lift 11.5 ft. — steam back pres-
sure 15 lbs. 14" Suction —10"
discharge — 2V steam — 4"
exhaust. Overall width 6'8" —
overall height 9'lVi" — depth
3'9'A". Wt. approx. 10,000 lbs.
RECONDITIONED 1980
ABS-READY TO GO
NEW
UNUSED
EX
U.S.N.
MARINE VALVES... mos
all carefully removed from Exxon Tank
GATE VALVES - GLOBE VAl
MOST WITH
GATE
VALVES
150 LBS.
16" 14"
12" 8"
6" 5"
4" 3"
BIG
SAVING
ANGLE
VA
15C
16"
8"
4"
On globe valves and angle valves, we v
DUCTILE IRON & <
O.S.Y. RISING STEM OR NON-
VACREL PRESSURE RELIEF
6" ALL BRONZE
FIG. 120
Atmospheric venting—
3.0 PSI max. relief
setting. Pressure only.
Flanged connection.
Approx. wt. 140 lbs.
$1195 Reconditioned
FIG.
Closed ven
lifting gea
connection,
settings: 3.C
sure—1.0 PI
Approx. wl
$1195 Recc
BRONZE BA
i
BRONZE HORIZONTAL
10HLV INGERSOLL-RAND
CARGO PUMP
I #
Ingersoll-Rand 10HLV — 14"xl0". Bunker Fuel: 5150
GPM — 370' head — 1885 RPM. Sea Water: 6000 GPM
— 352' head — 1885 RPM. Reduction Gears: G.E. type
S-233 - Form AE — 700 HP - 6002/1685 RPM.
TURBINE: G.E. D P. 25 Class 4 - 700 HP - 6002 RPM
- PSIG 775 lbs — 825 — inlet temp. 560° -600° max.
Exhaust pressure 179" Hg absolute.
•frOUND THf
Main Office: (301) 5:
CABLE: BOSI RON—BALTIMORE
Digital Wave Publishing